-
Welding Stud/Nelson Stud/shear Stud/Shear Connector ISO13918
Ho hlahisa setsi sa boemo bo holimo- Nelson Stud se entsoeng le ho etsoa ke Beijing Jinzhaobo, e mong oa baetsi ba kholo ka ho fetisisa ba li-fasteners tsa meralo indastering. Nelson Stud eo hape e bitsoang shear stud, e hlophiselitsoe ho sebelisoa e le likhokahano tsa meralo, haholo bakeng sa ho matlafatsa konkreite. Sehlahisoa sena se tšoailoe ke CE mme se netefalitsoe ke FPC CE, se etsa hore e be boemo bo holimo le bo ka tšeptjoang.
-
Kopano ea Bolting ea JSS II09, S10T TC Bolt
Ho hlahisa Kopano ea Bolting ea JSS II09, e nang le matla a phahameng a S10T TC Bolt le Tension Control Bolt, e tlisoang ho uena ke Beijing Jinzhaobo. Khamphani ea rona ke e 'ngoe ea lihlahisoa tse kholo ka ho fetisisa tsa li-fasteners tsa meralo, tse tsepamisitseng maikutlo haholo ho hlahiseng boleng ba boleng bo holimo ba Structural Bolt, Tension Control Bolt, Shear Stud, Anchor Bolt le li-fasteners tse ling.
-
ASTM F3125 A325M /A490M Heavy Hex Bolt TY1&TY3
Beijing Jinzhaobo e motlotlo ho hlahisa A325M/A490M Structural High Strength Hex Bolt, bolt e khethehileng e etselitsoeng tšebeliso ea likhokahanyo tsa tšepe. Bolt e entsoe ka tšepe ea khabone e mahareng, tšepe ea alloy, le tšepe ea boemo ba leholimo ho netefatsa ho tšoarella le matla. Ka khoele ea metric, e fumaneha ka bophara le bolelele bo fapaneng ho fihlela litlhoko tsa hau tse ikhethileng.
-
EN14399-4 HV Structural Bolting Assemblies, CE e tšoailoe TY1&TY3
Re hlahisa sehlahisoa sa rona sa morao-rao, EN14399-4 HV Structural Bolting Assemblies, CE E tšoailoeng TY1&TY3. Joaloka moetsi ea tšeptjoang oa li-fasteners tsa meralo, rona ba Beijing Jinzhaobo re motlotlo ho fana ka bolt e matla e phahameng ea hex e etselitsoeng ka ho khetheha bakeng sa tšebeliso ea likhokahano tsa tšepe. Bolt ena e na le khoele e khuts'oane ho feta liboutu tse tloaelehileng tsa hex, e etsa hore e be e loketseng litlhoko tsa hau tsa sebopeho.
-
Welding Stud/Nelson Stud AWS D1.1/1.5
Ka botekgeniki e bitswang weld studs kapa Nelson studs kamora k'hamphani e ntlafalitseng theknoloji le lihlahisoa bakeng sa ts'ebeliso ea bona le ho sebetsa joalo ka li-weld studs. Mosebetsi oa liboutu tsa nelson ke ho matlafatsa konkreite ka ho cheselletsa sehlahisoa sena ho tšepe kapa sebopeho ho sebetsa e le yuniti e le 'ngoe e qobang ho phunyeha, ho tiisa le ho fokolisa sebopeho le konkreite. Li-studs tsa ho iketsetsa li-welding li sebelisetsoa marokho, litšiea, li-container, mehaho joalo-joalo. Re boetse re na le li-ferrules bakeng sa ho kenya liboutu hantle, kaha ho hlokahala hore ho be le welder e khethehileng e le hore mosebetsi o potlake hape o atlehe haholoanyane.
-
Hex Bolt A563/ DIN934/ ISO4032/ A194
Hex bolt e ne e sebelisoa mefuteng e mengata ea ts'ebeliso. moaho, mochini, morero, mobile joalo-joalo. ke lintho tse atileng haholo indastering ea li-fasteners.
-
Thupa e entsoeng ka khoele/ Stud Bolt/ Thread Bar/ B7 Stud Bolt
B7 stud bolt / thread rod e etselitsoe lisebelisoa tsa tšepe tsa Alloy bakeng sa likepe tsa khatello, li-valve, li-flanges le lisebelisoa tsa lipeipi tse sebelisoang mocheso o phahameng kapa maemo a khatello e phahameng kapa merero e khethehileng,
-
Hex Bolt A307/ DIN933/ DIN931/ ISO4014/ ISO4017
Hex bolt e ne e sebelisoa mefuteng e mengata ea ts'ebeliso. moaho, mochini, morero, mobile joalo-joalo. ke lintho tse atileng haholo indastering ea fastener.re jara EUR e tlase eketsa lekhetho 39.6%. CE e tšoailoe.
-
EN14399-10 HRC K0 Kopano ea Bolting, CE E tšoauoa
The Tension Controlled Screw EN14399-10 HRC Bolting Assembly ke khetho e ntle ka ho fetisisa ho li-screw tsa sebopeho sa matla a phahameng 'me li amoheloa ka molao ke RCSC (Research Council on Structural Connections) e le mokhoa o amohelehang oa ho kenya.
EN14399-10 HRC Tension Bolt e tla e feletse ka EN14399-3 HRD Heavy Nut le EN14399-5/-6 Standard Flat Washer.
Li-screws tse laoloang tsa tsitsipano li tla le sesebelisoa sa ho laola tsitsipano e hahelletsoeng (tip) ho fihlela maemo a holimo a tsitsipano 'me kahoo e khone ho pheta tsitsipano ena ho kenngoeng ka' ngoe ha sekurufu se seng le se seng. Li kenngoa ka sethunya se khethehileng sa motlakase se nang le sekoti se ka ntle se fetolang linate, ha sekoti se ka hare se tšoaretsoe ka har'a groove.
Ha boemo bo nepahetseng ba tsitsipano bo fihla, groove e robeha, e u fa pontšo ea pono ea ho kenya hantle.
-
ASTM F3125 Mofuta oa F1852/ F2280 Tension Control Bolt
The A325 Tension Controlled Screw kapa A325 TC Screw ke khetho e ntle ka ho fetisisa ea li-screw tsa sebopeho se matla a phahameng 'me se amoheloa ka molao ke RCSC (Research Council on Structural Connections) e le mokhoa o amohelehang oa ho kenya.
A325 Controlled Tension Bolt e tla e feletse ka 2H Heavy Nut le F-436 ASTM 1852-00 Standard Flat Washer.
Li-screws tse laoloang tsa tsitsipano li tla le sesebelisoa sa ho laola tsitsipano e hahelletsoeng (tip) ho fihlela maemo a holimo a tsitsipano 'me kahoo e khone ho pheta tsitsipano ena ho kenngoeng ka' ngoe ha sekurufu se seng le se seng. Li kenngoa ka sethunya se khethehileng sa motlakase se nang le sekoti se ka ntle se fetolang linate, ha sekoti se ka hare se tšoaretsoe ka har'a groove.
Ha boemo bo nepahetseng ba tsitsipano bo fihla, groove e robeha, e u fa pontšo ea pono ea ho kenya hantle.
-
Flat Washer F436/ F35/ SAE/ USS/ DIN125/ EN14399-5/ 6
Washer e sephara e ne e sebelisoa mefuteng e mengata ea tšebeliso. moaho, mochini, morero, mobile joalo-joalo. ke lintho tse atileng haholo indastering ea li-fasteners
-
Anchor Bolt, Foundation Bolt, Plain, Zinc Plated le HDG
Liboutu tsa ankora / motheo oa motheo li etselitsoe ho tiisa litšehetso tsa meralo ho metheo ea konkreite, litšehetso tse joalo tsa meralo li kenyelletsa litšiea tsa moaho, litšepe tsa litšiea tsa matšoao a litsela tse kholo, mabone a seterateng le mats'oao a sephethephethe, lipoleiti tse nang le tšepe le ts'ebeliso e ts'oanang.
BEIJING JINZHAOBO
MATLA A PHAHAMENG FASTENER CO., LTD.
MATLA A PHAHAMENG FASTENER CO., LTD.